XS005A High-Torque Anti-Burn Metal Gear Digital Servo
- · Continuous Current(A): 7.8A
- · Torque: High Torque
- · Pulse width range: 500~2500μs
- · Communication interface: PWM
- · Pin assignment: GND/Vcc/Signal
- · Name: 75kg Servo
- · Material: all metal
- · Stall torque: ≥53kgf.cm
- · Operating voltage: 7.4V
- · Stall current: 7.8A
Product Overview
XS005A High-Torque Anti-Burn Metal Gear Digital Servo
The XS005A Industrial Digital Servo is a standard-size, high-torque actuator engineered for demanding motion control applications, including quadruped robotics, 1/8 scale RC off-road chassis, aerial drones, and commercial robotic lawn mowers. Featuring a robust CNC-machined aluminum middle heatsink case and a heavy-duty all-metal gear train, the XS005A delivers exceptional mechanical strength and continuous thermal endurance.
Intelligent Protection: Anti-Burn & Anti-Shake Circuitry
Equipped with an advanced digital processing controller, the XS005A integrates intelligent anti-burn software algorithms that safeguard the coreless motor and driving transistors from thermal overload during prolonged stall events. Furthermore, built-in anti-shake signal processing suppresses signal jitter and output chatter, delivering rock-solid holding torque at precise angular positions.
Heavy-Duty Alloy Metal Gearing & HV Capability
Engineered to prevent gear tooth sweeping under extreme mechanical vibration and hard impacts, the XS005A’s precision-cut metal gears ensure smooth engagement with minimal backlash. Supporting High Voltage operation from 4.8V up to 8.4V (2S LiPo direct power), the servo generates up to 25.0 kg.cm stall torque at 8.4V with ultra-fast 0.07s/60° transit speeds.
Rigorous Quality Verification & Universal Integration
Every XS005A unit is thoroughly tested on automated test benches for speed, holding torque, and signal accuracy. Pre-wired with a high-flexibility cable and a standard 3-pin JR connector, the XS005A offers plug-and-play compatibility with standard receivers, flight controllers, and microcontrollers (e.g., Arduino, Raspberry Pi, STM32). Manufactured under strict ISO 9001 quality management systems, each package includes a complete hardware mounting set.
Key Advantages & Technical Highlights
- Prevent Tooth Sweeping: High-density alloy metal gears handle high impact forces without stripping.
- High Torque & High Precision: Generates up to 25.0 kg.cm torque at 8.4V with sharp, sub-degree return-to-center resolution.
- Thermal Management: Multi-fin CNC aluminum center section sheds heat rapidly during continuous high-load operations.
Technical Specifications
| Continuous Current(A) | 7.8A |
| Torque | High Torque |
| Pulse width range | 500~2500μs |
| Communication interface | PWM |
| Pin assignment | GND/Vcc/Signal |
| Name | 75kg Servo |
| Material | all metal |
| Stall torque | ≥53kgf.cm |
| Operating voltage | 7.4V |
| Stall current | 7.8A |
| Wire length | JR/300mm |
Key Features
Applications
